EHP003 Steel Valves

About EHP003

Euroheat & Power's EHP003 Guidelines were created to certify district heating steel valves (EN 488) for pre-insulted valve assemblies according to:

      • EN 488 “District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks – Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.”

Please note: The lists below are in alphabetical order and do not intend to influence the decision of manufacturers. All Certification Bodies and Testing Institutes are approved by Euroheat & Power in no order of preference.

For any questions regarding the EHP003 Certification Programme please contact [email protected]

List of Certificates List of Certificates

Certificate Licensee   Product Production plant Issuing certification body
EHP003 01/01 Vexve Oy Vexve and Naval Steel ball valves, for preinsulated district heating and cooling valve assemblies. DN 10 - 800 Vexve Oy
Pajakatu 11, Sastamala, and
Riihenkalliontie 10, Laitila
Finland
RISE Research Institutes of Sweden
EHP003 01/03 MSA a.s. MSA Ball valves, full bore, steel ball valves.
DN 150 – DN 1200
MSA a.s.i
Hlučínská 641, Dolní Benešov
Czech Republic
RISE Research Institutes of Sweden
EHP003 05/01

LLC ChelyabinskSpets

GrazhdanStroy

LD steel ball valves, for preinsulated district heating and cooling valve assemblies, DN 25 - 500 LLC ChelyabinskSpetsGrazhdanStroy
Russian Federation
454010 Chelyabinsk
Yeniseiskaya str. 47
Inspecta Sertifiointi Oy
EHP003 08/01 BROEN Poland Sp. z o.o. Trunnion mounted full port and reduced port ball valves, DN 150 – DN 1000 BROEN Poland Sp. z o.o.
Ul. Wojska Polskiego 4
64-610 Rogoźno
Poland
IMA Materialforschung und Anwendungstechnik GmbH
EHP003 08/02 BROEN Poland Sp. z o.o. Floating ball valves with full port and reduced port, DN 25 – DN 500 BROEN Poland Sp. z o.o.
Pieszycka 10
58-200 Dzierżoniów
Poland
IMA Materialforschung und Anwendungstechnik GmbH
EHP003 08/03 "DE Valves A/S Glamsbjerg Floating steel Ball Valves as reduced bore and full bore, DN20 -DN600 "DE Valves A/S Glamsbjerg
Bodebjergvej 22
DK-5620 Glamsbjerg"
IMA Materialforschung und Anwendungstechnik GmbH
EHP003 09/01 TEMPER LLC Temper steel ball valves, for pre-insulated district heating and cooling valve assemblies. DN 10 - 300 mm. TEMPER LLC
Schersa str. 93A,
Kurgan 940007
Russia
Technická inšpekcia, a.s.
EHP003 09/02 Klinger Fluid Control GmbH Steel ball valve assemblies for pre-insulated district heating systems.
Ballostar KHSVI-VVS, DN150 – DN800, trunnion mounted.
Klinger Fluid Control GmbH,
Am Kanal 8-10, 2352 Gumpoldskirchen,
Austria
Technická inšpekcia, a.s.
EHP003 09/03 ARMATURY Group a.s., Nádražní 129, 747 22 Dolní Benešov, Czech Republic
 
Ball valve DN 50 – DN 1200
 
Nádražní 129, 747 22 Dolní Benešov, Czech Republic Technická inšpekcia, a.s.
EHP003 09/04 Kompotek AB Preinsulated steel valve DN 75 – DN 1000 Erreesse valve (China) Co., Ltd., No. 87, Tongji street, Nanmingshan Road, Liandu District, Lishui, Zhejiang, China Technická inšpekcia, a.s.
EHP003 09/05

Klinger Fluid Control GmbH

Klinger steel ball valves assemblies for pre-insulated district heating systems

Klinger Fluid Control GmbH,
Am Kanal 8-10, 2352 Gumpoldskirchen, Austria

Technická inšpekcia, a.s.

 

How to Apply?

The acquire a certificate for District heating steel valves (EN 488) for pre-insulted valve assemblies) please follow these instructions:


1.    Select a Certification Body or Test Institute from the list available on our website
2.    Submit the Application Form to the Certification Body of your choice and send a copy to [email protected] 
3.    Add information about the Technical data (declaration of conformity regarding type test reports, drawings, etc.) according to clause 6.3.1 of the guidelines
4.    Clearly describe the quality control plan (procedures, test items and frequency, documentation) according to clause 6.5 of the guidelines

Once you decide which Certification Body or Test Institute you want to work with, and send the application form to them, they will check if everything is correct. All this information will be explained to you by the Certification Body you decide to work with as well as the costs involved.

To better understand which documents are needed, please consult chapter 6 of the Certification Guidelines, available on our website. 
When the testing is complete, the Certification Body will submit an annex with thee relevant information to Euroheat & Power attesting that the results are in accordance with the Certification Guidelines. We will issue a certificate, provide a PDF copy to the Certification Body to share with you and upload the certificate to our website.

For any questions regarding the EHP003 Certification Programme please contact [email protected]

Certification Bodies & Testing Institutes
Certification Bodies.png

Certification Bodies are accredited according to EN ISO/IEC 17065 "Conformity assessment - Requirements for bodies certifying products, processes and services" and approved by the Euroheat & Power Certification Board. They are entrusted with the certification operations and report to the Board.

Test Institutes carry out type and spot tests of samples taken as part of external inspections. Test reports are then created by test Institutes which hold a valid accreditation to perform the testing in accordance with the conditions specified by the respective EN standards and accredited according to EN ISO/IEC 17025 . 
If sub-contractors are used to perform tests, they must possess the relevant accreditation and be approved by the responsible Test Institute.
    Disclaimer: It is up to EUROHEAT & POWER'S Certification Board to approve Testing Institutes.

Please note: The lists below are in alphabetical order and do not intend to influence the decision of manufacturers. All Certification Bodies and Testing Institutes are approved by Euroheat & Power in no order of preference. 

For a PDF version of the list of Certification Bodies and Testing Institutes, please click here.

EHP003 List of Certification Bodies EHP003 List of Certification Bodies

IMA Materialforschung und Anwendungstechnik GmbH

Wilhelmine-Reichard-Ring 4, D-01109 Dresden, Germany

Mr. Heiko Below

Tel: +49 351 8837-6465

Fax: +49 351 8837-530

Email: [email protected]

Inspecta Sertifiointi

P.O. Box 1000, Sörnäistenkatu 2, FI-00581 Helsinki, Finland

Ms. Annamaija Naula-Iltanen

Tel: +358 50 460 0098 Fax: +358 10 521 6750

Email: [email protected]

KIWA

Sir W. Churchilllaan 273, P.O. Box 70, 2280 AB Rijswijk, The Netherlands

Ms. Yvette Golstein Brouwers

Tel: +31 88 998 4662  Fax: +31 70 414 44 20

Email: [email protected]

RISE Research Institutes of Sweden

Brinellgatan 4, 504 62 Borås, Sweden

Mr. Nima Azarmehr

Tel: +46 10 516 5010 Fax: +46 31 16 12 95

Email: [email protected]

Technická Inšpekcia

Trnavská cesta 56, 821 01 Bratislava, Slovakia

Mr. Peter Pribula

Tel: +421 2 49208 107

Email: [email protected]

 

 

EHP003 List of Testing Institutes EHP003 List of Testing Institutes

IMA Materialforschung und Anwendungstechnik GmbH

Wilhelmine-Reichard-Ring 4, D-01109 Dresden, Germany

Mr. Heiko Below

Tel: +49 351 8837-6465

Fax: +49 351 8837-530

Email: [email protected]

RISE Research Institutes of Sweden

PO Box 857, SE-50115 Borås, Sweden

Mr. Nima Azarmehr

Tel: +46 10 516 5010 Fax: +46 31 16 12 95

Email: [email protected]

Technická Inšpekcia

Trnavská cesta 56, 821 01 Bratislava, Slovakia

Mr. Peter Pribula

Tel: +421 2 49208 107

Email: [email protected]